Home About Us Products Message Contact Us Chinese
  About Us
  Credit
  Minus 60 ℃ ultra-low-temperature single-freezing machine
  Cold air dryer freezing
  Aquatic products processing plant shop air conditioning program examples
  Cold Storage Door
 
Xiamen heguanxin Cryogenic Equipment Co., Ltd.
Address:12-16 xiabi road xiaping .tongan . Xiamen
TEL: +86-592-7137798,18965825562
E-mail:hgxzl01@bindoor.com
 
Home > Product > Aquatic products processing plant shop air conditioning program examples
 
Aquatic products processing plant shop air conditioning program examples
Aquatic products processing plant shop air conditioning program examples
1, according to the user’s actual situation and requirements are as follows:
1, aquatic products processing workshop, required health standards up to the export commodity inspection, anti-moisture, antibacterial and corrosion resistance.
2, workshop size:
No
Workshop Name
Workshop size(M)
Area(M)
Temperature(℃)
Notes
1
加工间
25500×30000
765
+15

车间层高3米

2
原料间
12000×42000
504
+15
3
精加工间
11000×30000
330
+15
4
深加工间
25500×30000
765
+15
5
包装间
12000×28500
342
+10
Second, the program overview:
1. Refrigeration system selection:
Using Freon cooling system, because of Wu a workshop will need air-conditioning, in which a processing plant Stanford temperature +15 ℃, additional packing room temperature at +10 ℃, such as ammonia cooling machine, workshop temperature difference, cooling effect would be reduced, while not necessarily at the same time the use of air-conditioning for each plant, ammonia refrigeration unit plant utilization factor and the coefficient of air-conditioning evaporator can not match the operation. The temperature fluctuations of the machine is also a problem of ammonia, ammonia machines need to distant room, frequent manual start, manual temperature control, low-power-hungry performance such as the effect is difficult to use in modern factories. Ordinary commercial air-conditioning or chiller evaporator temperature reaches less than other common air-conditioning heat exchanger at a relatively low temperature heat sink will be frost plug the phenomenon, a multi-unit cold freon air pipe air conditioning system to better address the above problem. Air-conditioning evaporator box installed in the shop ceiling, through the wind pipe blowing workshop every corner of the main air-cooled wall surface Guiji placed in the workshop.
2. Freon air cold air-conditioning machine system performance:
A, specially designed for low-temperature conditions, low temperature is not frost block;
B, integration Guiji in a factory on the debugging;
C, automatic temperature control, temperature fluctuation is small;
D, air condensation system, the user convenient installation and maintenance.
3, the wind cold air-conditioning machine technology configuration:
1, compressor - selection of high-quality Mitsubishi Heavy Industries, Hermetic compressor with internal thermal protection device, safe and reliable operation.
2, condenser - use of foreign capital, Guangzhou Daxin air condenser, using high-quality brass, from CNC CNC plate punching holes set pieces processed.
3, evaporator - the standard use of foreign investment in Guangzhou Daxin 9.52 ribbed tube, low-temperature heat aluminum tailor-made machines, the introduction of international fourth-generation auto-stamping die made by the automatic processing.
4, the wind wheel - with the world’s brand of Taiwan KOO centrifugal fan with a large amount of wind, air pressure high, low noise, safe and reliable operation advantages.
5, the electrical - use of foreign capital, Guangzhou, Jiangmen, or ABB motors.
6, Pulley - transmission system uses highly balanced cone wheel and imports BANDO. And Israel VOLTAPOWER tooth belt.
 
4, the wind cold air-conditioning machine diagram:
5, the wind cold air-conditioning machine Technical parameters:
6, the wind cold air-conditioning installation diagram:
Processing, the raw materials, the finishing room and deep-processing temperature of between +15 ℃ (± 3 ℃), cooling capacity 300 kilocalories per square meter;
Packing room temperature at +10 ℃ (± 3 ℃), cooling capacity of 350 kcal / per square meter.
车间名称
车间尺寸(米)
面积(平米)
每平米冷量(大卡)
温度(℃)
制冷量(大卡)
1
加工间
25500×30000
765
300
+15
229500
2
原料间
12000×42000
504
300
+15
151200
3
精加工间
11000×30000
330
300
+15
99000
4
深加工间
25500×30000
765
300
+15
229500
5
包装间
12000×28500
342
300
+15
119700
7, air-conditioning plant selection:
Processing, the raw materials, the finishing room and deep-processing temperature of between +15 ℃ (± 3 ℃), cooling capacity 300 kilocalories per square meter;
Packing room temperature at +10 ℃ (± 3 ℃), cooling capacity of 350 kcal / per square meter.
选用机型
风压
静压
风量
风冷外主机尺寸
内风管机尺寸
回风口尺寸
出风口尺寸
DK-40E3
320
16
21600
1800
1200
1600
1200
1500
1500
520×1560
400×1200
DK-25E2
300
20
13500
1700
1200
1500
1000
1500
1500
520×1300
400×1000
Address:12-16 xiabi road xiaping .tongan . Xiamen    TEL: +86-592-7137798,18965825562    FAX: +86-592-7137780    E-mail:hgxzl01@bindoor.com
Copyright   Xiamen heguanxin Cryogenic Equipment Co., Ltd.
Design:21Food Technical Support:guidechem